¡ñIt is suitable for strip and granule materials that contain more moisture and has not strict requirement to heat-resistant such as glassfiber, ceramics semifinished product, fireproof material, pill, foodstuff and chemical material, etc.

¡ñMaterial will be spread onto pedrail uniformly. When it passes through the first region, it is acted by microwave. Its energy will turn to heat energy at instantaneous and make material begin to raise its
temperature from interior to exterior, water vapor pressure of granule interior layer is raised suddenly and forced water vapor to expand towards exterior layer of granule. At this time material will be transmitted to second region, plenty of hot air that is heated by compensation or cycle will enter into box and carry damp air to exhaust out. After enter into third region, part of moisture has been evaporated and the temperature of material has dropped. If acted by microwave again, the temperature of material will raise quickly. Moisture will be removed by air hole. Move in cycles this way, moisture will be dropped and the purpose of dry is reached.

1.Absorb the advantages of microwave drying and traditional hot air drying, optimize combination and learn from others' strong points to offset one's weakness.
2.Improve efficiency further and reduce the problem caused by microwave temperature raising too fast or too centralization.
3.Overcome the shortcoming of large consumed energy for drying material with high moisture.
4.Because the section of material discharging is heated by microwave, it reduces cross pollution and the purpose of sterilization is reached.
5.The product has been applied for patent.